View UPG2151T5K-E2-A_1332699.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PRELIMINARY PRODUCT INFORMATION
NEC's COMPACT 1/2W UPG2151T5K L, S-BAND SPDT SWITCH
FEATURES
* SWITCH CONTROL VOLTAGE: Vcont (H) = 1.8 to 5.3 V (3.0 V TYP.) Vcont (L) = -0.2 to +0.2 V (0 V TYP.) * LOW INSERTION LOSS: 0.30 dB TYP. @ 0.5 to 1.0 GHz 0.35 dB TYP. @ 1.0 to 2.0 GHz 0.40 dB TYP. @ 2.0 to 2.5 GHz 0.50 dB TYP. @ 2.5 to 3.0 GHz * HIGH ISOLATION: 25 dB TYP. @ 0.5 to 1.0 GHz 18 dB TYP. @ 1.0 to 2.0 GHz 17 dB TYP. @ 2.0 to 2.5 GHz 13 dB TYP. @ 2.5 to 3.0 GHz * POWER HANDLING: Pin (1 dB) = +27.0 dBm TYP. @ 0.5 to 3.0 GHz, Vcont (H) = 3.0 V/0 V * HIGH-DENSITY SURFACE MOUNTING: 6-pin TSON package (1.0 x 1.0 x 0.4 mm) * Pb FREE
DESCRIPTION
NEC's UPG2151T5K is a GaAs MMIC L, S-band SPDT switch for mobile phones and other L, S-band size restricted applications. This device can operate from 0.5 to 3 GHz with low insertion loss and high isolation. The UPG2151T5K is housed in a 6-pin Pb Free low profile package suitable for high-density surface mounting, and is a packaged alternative to die for usage in modules.
APPLICATIONS
* Cellular and cordless telephones * BluetoothTM , ZigBee * Short Range Wireless * Alternative to die usage
ORDERING INFORMATION
PART NUMBER PACKAGE 6-pin TSON MARKING G1 SUPPLYING FORM * Embossed tape 8 mm wide * Pins 1, 6 face the perforation side of the tape * Qty 5 kpcs/reel
UPG2151T5K-E2-A
Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: UPG2151T5K-A
Caution
Observe precautions when handling because these devices are sensitive to electrostatic discharge.
California Eastern Laboratories
UPG2151T5K PIN CONNECTIONS
Top View Top View Bottom View
PIN NO. 1 PIN NAME OUTPUT1 GND OUTPUT2 Vcont2 INPUT Vcont1
1 2 3
6 5 4
1 2 3
6 5 4
6 5 4
1 2 3
2 3 4 5 6
TRUTH TABLE
Vcont1 Low High Vcont2 High Low INPUT-OUTPUT1 OFF ON INPUT-OUTPUT2 ON OFF
ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified)
PARAMETER Switch Control Voltage Input Power Operating Ambient Temperature Storage Temperature SYMBOL Vcont Pin TA Tstg RATINGS +6.0 Note +30 -45 to +85 -55 to +150 UNIT V dBm C C
Note |Vcont1-Vcont2| 6.0 V
RECOMMENDED OPERATING RANGE (TA = 25C, unless otherwise specified)
PARAMETER Switch Control Voltage (H) Switch Control Voltage (L) SYMBOL Vcont(H) Vcont(L) MIN. 1.8 -0.2 TYP. 3.0 0 MAX. 5.3 0.2 UNIT V V
UPG2151T5K ELECTRICAL CHARACTERISTICS
PARAMETER Insertion Loss 1 Insertion Loss 2 Insertion Loss 3 Insertion Loss 4 Isolation 1 Isolation 2 Isolation 3 Isolation 4 Input Return Loss Output Return Loss 0.1 dB Loss Compression Input Power Note 1 1 dB Loss Compression Input Power Note 2 2nd Harmonics 3rd Harmonics Switch Control Current Switch Control Speed 2f0 3f0 Icont tSW 50% CTL to 90/10% RF SYMBOL Lins1 Lins2 Lins3 Lins4 ISL1 ISL2 ISL3 ISL4 RLin RLout Pin (0.1 dB) Pin (1 dB)
(TA = +25C, Vcont (H) = 2.6 to 3.0 V, Vcont (L) = 0 V, DC blocking capacitors value = 56 pF, unless otherwise specified)
TEST CONDITIONS f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz f = 2.5 to 3.0 GHz f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz f = 2.5 to 3.0 GHz f = 0.5 to 3.0 GHz f = 0.5 to 3.0 GHz f = 2.0/2.5 GHz, 2.6 V f = 2.0/2.5 GHz, 3.0 V f = 2.0/2.5 GHz, 2.6 V f = 2.0/2.5 GHz, 3.0 V f = 2.0/2.5 GHz, Pin = +16 dBm f = 2.0/2.5 GHz, Pin = +16 dBm MIN. - - - - 22 15 14 10 - - +18.0 +20.0 - - 65 65 - - TYP. 0.30 0.35 0.40 0.50 25 18 17 13 20 20 +21.0 +23.0 +24.0 +27.0 75 75 0.2 10 MAX. 0.45 0.50 0.55 0.65 - - - - - - - - - - - - 20 200 dBc dBc A ns UNIT dB dB dB dB dB dB dB dB dB dB dBm dBm dBm
Notes 1. Pin (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of linear range. 2. Pin (1 dB) is the measured input power level when the insertion loss increases 1 dB more than that of linear range.
UPG2151T5K EVALUATION CIRCUIT
Vcont1
INPUT
Vcont2
C0 Note 1,000 pF 6 5 4 1,000 pF
1 C0
2
3 C0
OUTPUT1
OUTPUT2
Note C0 : 56 pF
The application circuits and their parameters are for reference only and are not intended for actual design-ins.
UPG2151T5K PACKAGE DIMENSIONS
6-PIN TSON (UNIT: mm)
ry na i lim re P
0.175 0.35 1.0 0.35 0.4MAX. 1.0 0.15 0.15
UPG2151T5K RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method Infrared Reflow Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (package surface temperature) Time at temperature of 200C or higher Preheating time at 120 to 150C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (molten solder temperature) Time at peak temperature Preheating temperature (package surface temperature) Maximum number of flow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (pin temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2%(Wt.) or below : 215C or below : 25 to 40 seconds : 30 to 60 seconds : 3 times : 0.2%(Wt.) or below : 260C or below : 10 seconds or less : 120C or below : 1 time : 0.2%(Wt.) or below : 350C or below : 3 seconds or less : 0.2%(Wt.) or below Condition Symbol IR260
VPS
VP215
Wave Soldering
WS260
Partial Heating
HS350
Caution
Do not use different soldering methods together (except for partial heating).
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
03/04/2005
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.
5-146

▲Up To Search▲

Price & Availability of UPG2151T5K-E2-A

	To Download UPG2151T5K-E2-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .